Aastra Ascotel IntelliGate A150 - Page 494

System Functions and Features as of I7.9
494 Features
syd-0200/3.0 – I7.9 – 11.2009
Phone booth operation, variant 3
User 29, who does not have exchange access authorization, picks up the receiver
and dials the operator’s number (11). He asks for a trunk line and puts down the re-
ceiver.
Fig. 226 Signalling on the Operator Console with variant 3 of phone booth operation
Operating sequence on the Operator Console:
• Press function key (*32 configured)
• Suffix dial 29 or wait 2 seconds
• Press the End key
As a call is signalled, the user in the phone box picks up the receiver, obtains a dial
tone and dials.
When the call in the phone box is completed the charge recall signal rings on the
Operator Console and the call charge information is displayed in the same way as
in variant 1 or 2 (possibly with a delay depending on the configuration).
*$BMMGSPNTVCTDSJCFS
*'VODUJPOLFZDIBSHFSFDBMM

-JOFLFZ@@@@@@@@@@@@@@@@@P@@
5)64&1
&ORVJSZDBMM%5.'1BSL.FTTBHF
haz1249aaena0