11-12 Connecting to an External Computer
4. Click Restart.
5. Connect the USB cable to a Type A connector on the Mac and to the uppermost USB con-
nector (Type B) on the back of the analyzer.
6. Turn on the analyzer.
7. Use the Network section in the System
Preferences application (Go > Applica-
tions > System Preferences > Network) to
enable the virtual communications port.
Click OK.
8. Select Network Port Configurations from the Show list.
9. Enable the new port
(usbserial-1B22 in the example at
right) by checking its On box and
clicking Apply Now.
10. Configure any needed applications to
communicate with the analyzer over
the virtual communication port.
To Next Page
Loading...
