Configuring the Analyzer 5-27
3. Select Analyzer Printer or External Printer.
4. For External Printer: Select the printer from the displayed list of available printers.
The analyzer then detects automatically detects the type of printer and configures it as
needed.
Testing a Printer
Test the function of the analyzer’s printer or a connected external printer as follows.
1. In the Printer Setup screen, press Test.
2. Select the printer to test.
The selected printer then outputs a test page.
Printers Supported by the VetScan VS2
For a list of printers supported by the VS2 as of November 2008, see Appendix B, “Supported
Printers.”
Note: Printer capabilities are subject to change without notice. For an up-to-
date list of printers supported by the VetScan VS2, contact Abaxis Tech-
nical Service 24 hours a day, 7 days a week, at 1-800-822-2947.
Set Default
Analyzer Printer
External Printer
Back Home
Select Printer
Back
Analyzer Printer
External Printer
Home
To Next Page
Loading...
