5-26 Configuring the Analyzer
5.12 Configuring Printers
Use these procedures to set up and configure the analyzer’s internal printer, or an external printer
connected to the analyzer.
1. In the Home screen, press the Settings icon.
2. Press the Printer Settings icon.
3. You can now do the following:
■ To select the default printer to be used with the analyzer,
see below.
■ To test a printer for proper function, see page 5-27.
■ To select which reports can be printed automatically
after an analysis, see page 5-28.
Setting the Default Printer
Select the printer to use for printing results and reports as follows.
1. In the Printer Setup screen, press Configure.
2. Press Set Default.
Printer Setup
Configure
Test
Back Home
Configure Printer
Set Default
Select Reports
Back Home
To Next Page
Loading...
