6-4 Recalling Results
Searching for Results by Patient/Control ID
1. In the Search screen, press Patient/Control ID.
2. Enter the patient ID number.
Use the right arrow key (
X) to enter dashes (–), and the left
arrow key (
W ) to backspace.
3. Press Search.
The analyzer then displays a list of results (Patient, Control,
and Error) sorted first by ID, then by date. Samples with the ID
number entered are at the top, followed by the next-closest
matches.
Use the up (S) and down (T) arrow keys to scroll through the
list. (The list wraps around when either end is reached.)
4. Press to select and display the particular results.
Use the up (
S) and down (T) arrow keys to scroll through the
results.
To Next Page
Loading...
