5-2 Configuring the Analyzer
5.1 Using the Settings Screens
The following shows the general path through the menus for performing the procedures in this
section. These procedures are available whenever the analyzer displays the Home screen.
1. In the Home screen, press the Settings icon.
The Analyzer Settings screen then opens. From here, adjust the date and
time, language, sound, display, and printer, or view basic information about
the analyzer.
2. Press the More Settings icon.
This opens the second Analyzer Settings screen. Use this screen as a starting
point to make additional settings, work with reference ranges, or update the
analyzer’s software.
3. Press Home to return to the analyzer’s Home screen.
5.2 Customizing Reference Ranges
The reference ranges stored in the analyzer may be changed so that they are specific for a patient
population. This can be done whenever the Home screen is displayed.
Note: Change reference ranges in either Common units or SI units, not both.
The analyzer automatically converts units.
1. In the Home screen, press the Settings icon.
2. Press the More Settings icon.
3. Press the Reference Range Settings icon.
To Next Page
Loading...
