Configuring the Analyzer 5-23
5.11 Adjusting the Display
You can adjust the brightness of the analyzer’s display as needed, and calibrate the display’s
touchscreen for best performance. In addition, you can set the period that the analyzer must be
inactive before it activates a screen saver or enters power-saving mode. (For either, touch the
screen to wake the analyzer.)
1. In the Home screen, press the Settings icon.
2. Press the Display Settings icon.
3. Adjust or calibrate the display as follows.
■ To adjust the backlight brightness:
a. Press Back Light.
b. Use the controls to set the brightness:
❑ Use the up (S) and down (T) arrow
keys to adjust the brightness level.
❑ Press Full to select maximum brightness.
❑ Press Default to set the brightness to its
factory default.
c. Press Save to store the new setting.
Display Settings
Back Light
Screen Saver
Power Save
Back Home
Calibrate
Backlight Brightness
70%
Current
New
Full
Default
90%
HomeBack Save
To Next Page
Loading...
