Abaxis VetScan vs2 - Modifying the Reference Ranges for a Species

5-4 Configuring the Analyzer
3. Select the reference range from the list. If needed, use the up
(S) and down (T) arrow keys to view the entire list.
4. Use the controls to set the upper and lower limits for the range.
■ Use the up (S) and down (T) arrow keys to adjust the
values.
■ Press Clear to set both limits to zero.
■ Press Default to use the factory default values for the
range.
5. Press Save to store the changes.
Modifying the Reference Ranges for a Species
Use this procedure to modify the reference ranges for a particular species, or the analyzer’s
default set.
1. In the Modify Reference Ranges screen, press Species.
2. Choose a species from the list. Use the up (
S) and down (T)
arrow keys as needed to scroll through the list.
ALB Ranges
HomeBack
Dog
3.3 - 5.5 g/dL
Cat
Equine
Cntl. 1
Cntl. 2
3.3 - 5.5
3.3 - 5.5
3.3 - 5.5
3.3 - 5.5
g/dL
g/dL
g/dL
g/dL
ALB Default Range [g/dL]
SaveCancel
3.3 5.5
Lower
Upper
Clear Default
Species
HomeBack
Add Species
Remove Species
Factory Default Species
Dog
Cat