Abaxis VetScan vs2 - Frequently Asked Questions; General Questions

General Information 2-3
2.5 Frequently Asked Questions
■ “General Questions” on page 2-3
■ “Analyzer Setup” on page 2-4
■ “Samples” on page 2-5
■ “Rotors” on page 2-5
■ “Testing and Results” on page 2-6
General Questions
■ Is the VS2 a “one test at a time” system?
No. The VS2 offers a variety of assays in a number of preconfigured panels for the utmost
flexibility, while requiring only seconds of hands-on time, and providing the lowest possi-
ble operating costs.
See Section C, “Methods Performance”for information on assays and panels.
■ Do I need a separate instrument for electrolytes or blood gases?
No. The VS2 offers Na+, K+, tCO
2
, and Cl- on certain panels, which can be run on the
same unit, test procedure, and sample.
■ Can the analyzer detect a flawed or defective rotor?
Yes. The VS2’s extensive Intelligent Quality Control (iQC) detects any flaw or potential
anomaly in the rotor. Abaxis also provides a Performance Guarantee covering manufac-
ture-defective rotors. (This does not include cancellations or assay suppressions due to
improper rotor storage, operator error, or inadequate sample integrity.)
■ How many species can the VS2 store for reference ranges?
In addition to cat, dog, and horse, the VS2 includes pre-determined specie labels for enter-
ing your own reference ranges, and also provides 99 open labels for adding further spe-
cies.
■ How many result records can the VS2 hold?
The VS2 stores the results of the last 5000 rotors run. Thereafter, the VS2 replaces the old-
est record with the most recent.