5-14 Configuring the Analyzer
3. The display then shows the analyzer information.
5.7 Changing Date and Time
The date and time is factory preset to Pacific Time. Reset the date and time as needed when set-
ting up the analyzer, and periodically thereafter.
1. In the Home screen, press the Settings icon.
2. Press the Date and Time icon.
3. Use the controls to set the time:
■ Use the up (S) and down (T) arrow keys to adjust
the hour and minutes.
■ Press 12/24 Hour to switch between 12- and 24-hour
time formats.
■ Press Zero Sec. to set the seconds to zero.
Set Time
10:15:00 AM
Hour Minute
12/24 Hour Zero Sec.
Date
To Next Page
Loading...
