Quick Reference Guide 1-3
Step 3: Install Printer Paper Roll
1. Open the printer cover. If the printer contains a roll of printer paper, remove it from the
printer.
2. Remove the wrapper from the new
paper roll, then unroll several inches
of paper.
3. Put the roll into the printer so that
paper unrolls from the bottom of the
roll and out towards the front of the
analyzer, as shown at right.
Make sure several inches of paper
extend out of the printer slot.
4. Press the cover closed till it locks into
place.
5. Pull gently on the end of the paper
until it is taut.
To Next Page
Loading...
