5-22 Configuring the Analyzer
5.10 Setting Sound Volumes
Use this procedure to adjust the volume of the sounds used for the analyzer’s screen click, alert,
and status notification.
1. In the Home screen, press the Settings icon.
2. Press the Sound Settings icon.
3. Select the sound to adjust.
4. Use the controls to set the selected volume.
■ Use the up (S) and down (T) arrow keys to adjust
the volume.
■ Press Off to turn the sound off.
■ Press Default to set the sound to its factory default
value.
5. Press Save to store the new setting.
Sound Settings
Screen Click
Alerts
Status
Back Home
Click Volume
0%
Current
New
Off
Default
50%
HomeBack Save
To Next Page
Loading...
