Recalling Results 6-1
Section 6
Recalling Results
The VetScan VS2 Analyzer includes a Recall function that provides
access to the results of the most recent tests, including patient results,
control results, and test errors.
The Recall function is available from the analyzer’s Home screen.
You can search results by patient ID number or date, or view patient
results or control results by date. You can also view results in memory
one record at a time, print results, or transmit them to a computer.
Troubleshooting Flags
The VS2 Analyzer performs a series of internal quality checks to ensure
accurate results. When the analyzer detects a problem, it either sup-
presses certain chemistry results (in which case it prints troubleshooting
“flags” — ~~~, HEM, LIP, or ICT — in place of values), or cancels the
run (the rotor cancels and no results are printed). When either of these
situations occur, print or transmit an error report as described in
Section 6.2.
This section includes instructions for recalling, viewing, printing, and
transmitting results and reports.
■ “Recalling the Last Rotor Results” on page 6-2
■ “Searching Results” on page 6-3
■ “Browsing Results” on page 6-7
■ “Transmitting Results” on page 6-9
Note: The analyzer must be connected to a com-
puter to transmit results — see Section 11 for
instructions.
To Next Page
Loading...
