6-2 Recalling Results
6.1 Recalling the Last Rotor Results
Use this procedure to recall, print, or transmit the results of the last rotor run.
1. In the Home screen, press the Recall icon.
2. Press Last Rotor.
3. The results from the last rotor are displayed for review. You can
use the up (S) and down (T) arrow keys to scroll through the
results.
4. To print these results or transmit them to an external computer:
a. Press Print.
b. Select Print and/or Transmit.
c. Select Results, iQC, Error Report, or All.
Note: If the rotor produced no results, only Error Report
will be available.
The display shows “Sending Report...” while the
report or results are printing or transmitting.
Select Report
All
Results
iQC
Error Report
Back Home
Print Transmit
To Next Page
Loading...
