Configuring the Analyzer 5-25
b. Use the controls to set the delay.
❑ Use the up (S) and down (T) arrow keys
to adjust the delay.
❑ Press Never to prevent the analyzer from
entering power-saving mode.
❑ Press Default to set the delay to its factory
default.
c. Press Save to store the new setting.
■ To calibrate the display’s touchscreen:
a. Press Calibrate.
b. Press Ye s to start the calibration process, and fol-
low the on-screen instructions.
Screen Saver Wait
15 min
Current
New
Never
Default
Never
HomeBack Save
Display Settings
Back Light
Screen Saver
Power Save
Back Home
Calibrate
Calibrate Touch Screen
Press Yes to start
HomeBack Yes
To Next Page
Loading...
