Start-up, control with I/O and ID run 23
To view the details of a parameter that cannot be
adjusted via the I/O menu, press
(View).
To adjust the value of a parameter, press
(Edit), adjust the value using , , and
keys and press
(Save). Note that the actual
wiring must match the new value.
Go back to the Main menu by pressing
(Back) repeatedly.
4 – Diagnostics menu
After making the additional adjustments and
checking the I/O connections, use the
Diagnostics menu to make sure that the setup is
functioning correctly.
In the Main menu, select Diagnostics and press
(Select) (or ).
Select the diagnostics item you want to view and
press (Select).
Return to the Diagnostics menu by pressing
(Back).
ACS580 FW.book Page 23 Wednesday, September 21, 2016 9:48 PM
To Next Page
Loading...
