Start-up
117
ACS800-17LC-specific parameters in the application program
The ACS800-17LC specific actual signals and parameters in the ACS800 Standard
Control Program (running on the inverter control board) are described below.
Terms and abbreviations
Actual signals and parameters of supply unit in inverter unit program
Term Definition
Actual signal Signal measured or calculated by the drive. Can be monitored by the user. No user
setting possible.
FbEq Fieldbus equivalent: The scaling between the value shown on the control panel and
the integer used in serial communication.
Parameter A user-adjustable operation instruction of the drive
No. Name/Value Description FbEq Def.
09 ACTUAL SIGNALS
Signals from the supply unit (line-side converter).
09.12 LCU ACT SIGNAL 1 Line-side converter signal selected by par. 95.08 LCU PAR1
SEL.
1 = 1 106
09.13 LCU ACT SIGNAL 2 Line-side converter signal selected by par. 95.09 LCU PAR2
SEL.
1 = 1 110
To Next Page
Loading...
