Technical data
165
Applicable standards
The drive complies with the following standards.
• EN ISO 13849-1:2008 Safety of machinery – Safety-related parts of control systems – Part 1: General principles
for design
• EN 60204-1:2006 Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
• IEC/EN 60529:1991 +
corrigendum May 1993 +
amendment A1:2000)
Degrees of protection provided by enclosures (IP code).
• IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests
• EN 61800-3:2004 Adjustable speed electrical power drive systems - Part 3: EMC product standard including
specific test methods
• EN 61800-5-1:2007 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements –
Electrical, thermal and energy
• EN 61800-5-2:2007 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements –
Functional
• UL 508A: 1st Edition UL Standard for Safety, Power Conversion Equipment, second edition
• CSA C22.2 No. 14-05 Industrial control equipment
To Next Page
Loading...
