Technical data
163
Internal cooling circuit piping Aluminium, acid-fast stainless steel, PA pipes (inner/outer diameter in drain and bleed
pipes: 9 mm / 11.5 mm; inner/outer diameter in main pipes of the modules: 13.5 mm / 17.5
mm)
Fire safety of materials
(IEC 60332-1)
Insulating materials and non-metallic items: Mostly self-extinctive
Packaging Frame: Wood or plywood. Plastic wrapping: PE-LD. Bands: PP or steel.
Disposal The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the
printed circuit boards contain lead, both of which are classified as hazardous waste within
the EU. They must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
To Next Page
Loading...
