68Necessary tools ...................................................................................
68Examining the delivery ..........................................................................
69Moving and unpacking the drive ..............................................................
69Moving the drive in its packaging .........................................................
69Lifting the crate with a forklift .........................................................
70Lifting the crate with a crane ...........................................................
71Moving the crate with a forklift ........................................................
71Removing the transport package .........................................................
72Moving the unpacked drive cabinet .......................................................
72Lifting the cabinet with a crane ........................................................
72Moving the cabinet on rollers ...........................................................
73Moving the cabinet on its back .........................................................
73Moving the cabinet to its final position ..............................................
74Attaching the cabinet to the floor and wall or roof .......................................
74General rules ...................................................................................
75Attaching the cabinet (non-marine units) ...............................................
75Alternative 1 – Clamping .................................................................
76Alternative 2 – Using the holes inside the cabinet ..................................
76Alternative 3 – Cabinets with plinth options +C164 and +C179 ..................
77Attaching the cabinet (marine units) .....................................................
78Joining cabinet sections together ............................................................
82Miscellaneous .....................................................................................
82Cable duct in the floor below the cabinet ................................................
82Arc welding .....................................................................................
82Air inlet through the bottom of the cabinet (option +C128) .........................
83Air outlet duct on the cabinet roof (option +C130) ....................................
84Calculating the required static pressure difference ...............................
84Lifting lugs and bars .............................................................................
84Certificate of conformity ....................................................................
85Declarations of conformity .................................................................
5 Guidelines for planning the electrical installation
89Contents of this chapter ........................................................................
89Limitation of liability .............................................................................
89North America .................................................................................
90Selecting the supply transformer .............................................................
90Basic guidelines ...............................................................................
90Additional notes ...............................................................................
90A drive with a 12-pulse diode supply unit .............................................
92Selecting the supply disconnecting device .................................................
92Selecting the main contactor or breaker ....................................................
92Examining the compatibility of the motor and drive .....................................
92Protecting the motor insulation and bearings .........................................
93Requirements tables .........................................................................
93Requirements for ABB motors,
P
n
< 100 kW (134 hp) ..............................
94Requirements for ABB motors,
P
n
> 100 kW (134 hp) ..............................
95Requirements for non-ABB motors,
P
n
< 100 kW (134 hp) ........................
96Requirements for non-ABB motors,
P
n
> 100 kW (134 hp) ........................
96Abbreviations ..............................................................................
96Availability of d
u
/d
t
filter and common mode filter by drive type ..............
97Additional requirements for explosion-safe (EX) motors .........................
Table of contents 7
To Next Page
Loading...
