ABB ACS880-104

256 Parameters
22.77 Motor
potentiometer max
value
Defines the maximum value of the motor potentiometer. 1500.00
-32768.00 …
32767.00
Motor potentiometer maximum. 1 = 1
22.80 Motor
potentiometer ref
act
Displays the output of the motor potentiometer function. (The
motor potentiometer is configured using parameters
22.71…22.74.)
This parameter is read-only.
-
-32768.00 …
32767.00
Value of motor potentiometer. 1 = 1
22.81 Speed reference
act 1
Displays the value of speed reference source 1 (selected by
parameter 22.11 Speed ref1 source). See the control chain
diagram on page 644.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Value of reference source 1. See par.
46.01
22.82 Speed reference
act 2
Displays the value of speed reference source 2 (selected by
parameter 22.12 Speed ref2 source). See the control chain
diagram on page 644.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Value of reference source 2. See par.
46.01
22.83 Speed reference
act 3
Displays the value of speed reference after the mathematical
function applied by parameter 22.13 Speed ref1 function and
reference 1/2 selection (22.14 Speed ref1/2 selection). See
the control chain diagram on page 644.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after source selection. See par.
46.01
22.84 Speed reference
act 4
Displays the value of speed reference after application of 1st
speed additive (22.15 Speed additive 1 source). See the
control chain diagram on page 644.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after additive 1. See par.
46.01
22.85 Speed reference
act 5
Displays the value of speed reference after the application of
the speed share scaling factor (22.16 Speed share
). See the
control chain diagram on page 644.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after speed share scaling. See par.
46.01
22.86 Speed reference
act 6
Displays the value of speed reference after application of 2nd
speed additive (22.17 Speed additive 2 source). See the
control chain diagram on page 644.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after additive 2. See par.
46.01
No. Name/Value Description Def/FbEq16