Parameters 261
23.26 Ramp out balancing
enable
Selects the source for enabling/disabling speed reference
ramp balancing.
This function is used to generate a smooth transfer from a
torque- or tension-controlled motor back to being speed-
controlled. The balancing output would be tracking the
present “line” speed of the application and when transfer is
required, the speed reference can then be quickly “seeded” to
the correct line speed. Balancing is also possible in the speed
controller, see parameter 25.09 Speed ctrl balancing enable.
See also parameter 23.27 Ramp out balancing ref.
0 = Disabled
1 = Enabled
Not selected
Not selected 0. 0
Selected 1. 1
DI1 Digital input DI1 (10.02 DI delayed status, bit 0). 2
DI2 Digital input DI2 (10.02 DI delayed status, bit 1). 3
DI3 Digital input DI3 (10.02 DI delayed status, bit 2). 4
DI4 Digital input DI4 (10.02 DI delayed status, bit 3). 5
DI5 Digital input DI5 (10.02 DI delayed status, bit 4). 6
DI6 Digital input DI6 (10.02 DI delayed status, bit 5). 7
DIO1 Digital input/output DIO1 (11.02 DIO delayed status, bit 0). 10
DIO2 Digital input/output DIO2 (11.02 DIO delayed status, bit 1). 11
Other [bit] Source selection (see Terms and abbreviations on page 148). -
23.27 Ramp out balancing
ref
Defines the reference for speed ramp balancing. The output
of the ramp generator is forced to this value when balancing
is enabled by parameter 23.26 Ramp out balancing enable.
0.00 rpm
-30000.00 …
30000.00 rpm
Speed ramp balancing reference. See par.
46.01
No. Name/Value Description Def/FbEq16
To Next Page
Loading...
