ABB ACS880-104

362 Parameters
45.03 Saved kW hours Displays the energy saved in kWh compared to direct-on-line
motor connection.
If the internal brake chopper of the drive is enabled, all energy
fed by the motor to the drive is assumed to be converted into
heat, but the calculation still records savings made by
controlling the speed. If the chopper is disabled, then
regenerated energy from the motor is also recorded here.
When this parameter rolls over, parameter 45.02 Saved MW
hours is incremented.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.0 … 999.9 kWh Energy savings in kWh. 10 = 1 kWh
45.05 Saved money
x1000
Displays the monetary savings in thousands compared to
direct-on-line motor connection. This parameter is
incremented when 45.06 Saved money rolls over.
The currency is defined by parameter 45.17 Tariff currency
unit.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0…4294967295
thousands
Monetary savings in thousands of units. -
45.06 Saved money Displays the monetary savings compared to direct-on-line
motor connection. This value is a calculated by multiplying
the saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
When this parameter rolls over, parameter 45.05 Saved
money x1000 is incremented.
The currency is defined by parameter 45.17 Tariff currency
unit.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.00 … 999.99 units Monetary savings. 1 = 1 unit
45.08 CO2 reduction in
kilotons
Displays the reduction in CO
2
emissions in metric kilotons
compared to direct-on-line motor connection. This value is
incremented when parameter 45.09 CO2 reduction in tons
rolls over.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0…65535 metric
kilotons
Reduction in CO
2
emissions in metric kilotons. 1 = 1 metric
kiloton
45.09 CO2 reduction in
tons
Displays the reduction in CO
2
emissions in metric tons
compared to direct-on-line motor connection. This value is
calculated by multiplying the saved energy in MWh by the
value of parameter 45.18 CO2 conversion factor (by default,
0.5 metric tons/MWh).
When this parameter rolls over, parameter 45.08 CO2
reduction in kilotons is incremented.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.0 … 999.9 metric
tons
Reduction in CO
2
emissions in metric tons. 1 = 1 metric
ton
No. Name/Value Description Def/FbEq16