ABB CRB 1300 - Page 270

NoteAction
xx2000001695
Pull out the gearbox.4
Refitting the base
Use these procedures to refit the base.
Checking the radial sealings on the base
NoteAction
xx2000001713
Check the radial sealings on the base.
Replace if damaged, as described below.
1
Radial sealing: 3HAC066433-001Place the new motor-side radial sealing in its
groove in the base.
2
xx2000001714
The sealing lip is towards the swing side.
Continues on next page
270 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued