ABB CRB 1300 - Page 271

NoteAction
Axis-1 gearbox/motor sealing
pressfit base. Included in special
toolkit 3HAC076396-001.
Place the pressfit base (A) against one side of the
sealing and the pressfit tool (B) against the other
side, as shown in the figures.
3
xx2000001715
Axis-1 gearbox/motor sealing
pressfit tool. Included in special
toolkit 3HAC076396-001.
xx2000001716
xx2000001717
Fix the pressift tool with an M8 screw.4
Screw the screw, little by little and evenly, to press
the sealing into place.
5
Radial sealing: 3HAC070148-002Repeat steps 2 to 5 to replace the gearbox-side
radial sealing.
6
Continues on next page
Product manual - CRB 1300 271
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued