ABB CRB 1300 - Page 450

NoteAction
xx2000001720
Make sure that the screws on the gearbox are
properly fitted into the notches on the tubular.
3
xx2000001738
Screw: M3x35 12.9 Lafre
2C2B/FC6.9 (12 pcs)
Secure with screws.4
Tightening torque: 1.9 Nm
xx2000001736
Refitting the axis-4 mechanical stop flange
NoteAction
xx2000001735
Refit the axis-4 mechanical stop flange to the
gearbox.
1
Continues on next page
450 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued