NoteAction
xx2000001734
Refit the tubular to the housing.2
Screw: M4x12 12.9 Lafre
2C2B/FC6.9+PrO-COat111 (14 pcs)
Refit the screws.3
Tightening torque: 3.3 Nm
xx2000001729
Refitting the axis-4 motor
NoteAction
Check that:
• all assembly surfaces are clean and without
damages
• the motor is clean and undamaged.
1
xx2000001670
Install the timing belt to the gearbox pulley and
verify that the belt runs correctly in the grooves
of the pulley.
2
Continues on next page
452 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued
To Next Page
Loading...
