ABB CRB 1300 - Page 580

NoteAction
Guide pin for axis-2 gearbox. In-
cluded in special toolkit
3HAC076396-001.
Fit guide pins to the axis-2 gearbox.
Note
Always use two guide pins together.
2
xx2000001705
xx2000001706
Refit the axis-2 gearbox, with guidance from the
guide pins.
3
Screw: M5x25 12.9 Lafre
2C2B/FC6.9 (16 pcs)
Secure with screws.4
Tightening torque: 8.9 Nm±3%
xx2000001707
xx2000001708
Remove the guide pins.5
Continues on next page
580 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.7.2 Replacing the axis-2 gearbox
Continued