ABB CRB 1300 - Page 642

NoteAction
xx2000001669
Carefully lift out the motor.6
xx2000001670
Remove the timing belt.7
Separating the housing
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
xx2000001671
Support the weight of the extender unit (only for
CRB 1300-7/1.4), tubular and tilt unit, and remove
the screws.
2
xx2000001721
Valid for CRB 1300-11/0.9 and CRB 1300-10/1.15
Separate the tubular from the housing.
3
Continues on next page
642 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.7.4 Replacing the axis-4 gearbox
Continued