NoteAction
Lug plate of the axis-4 sealing as-
sembly tool, included in Special
toolkit for IP67 robots
(3HAC078203-001).
Fit the lug plate of the axis-4 sealing assembly
tool into the housing with three M4x10 screws.
Note
Pay attention to the location of the lugs.
xx2000002485
2
xx2000002484
Grease: 3HAC029132-001Apply a little grease to the sealing lip when repla-
cing the radial sealing and wipe clean after the
replacement.
3
xx2000002486
Fit the new sealing into the housing.
xx2000002537
4
Continues on next page
648 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.7.4 Replacing the axis-4 gearbox
Continued
To Next Page
Loading...
