ABB IP Touch 7 - Page 186

Communication objects
Application "Internal RTC"
Product manual 2CKA001473B5023
│
186
Limit temperature additional
heating stage
Input 2 bytes
[9.001]
Temperature
(°C)
K - S - A
Limit temperature basic
cooling stage
Input 2 bytes
[9.001]
Temperature
(°C)
K - S - A
Limit temperature additional
cooling stage
Input 2 bytes
[9.001]
Temperature
(°C)
K - S - A
Fan manual (cooling)
confirmation (Master)
Output 1 bit
[1.001]
Switching
K -L - U -
Fan coil step (cooling) Output 1 byte
[1.001]
Switching
K - - U -
Fan speed / level status
(cooling)
Input 1 byte
[5.001]
Percent
(0 - 100%)
K - S U A
Fan speed / level x (Cooling) Output 1 bit
[1.001]
Switching
K - - U -
Fan speed /
level
Output 1 byte
[5.001]
Percent
(0 - 100%)
K - - U -
Fan speed / fan speed level Input 1 byte
[5.001]
Percent
(0 - 100%)
K - S U A
Fan speed/
level
Output 1 bit
[1.001]
Switching
K - - U -
Controller status HVAC
(slave)
Input/
Output
1 byte
[5.001]
Percent
(0 - 100%)
K - S U A
Control On/Off
Input/
Output
1 bit
[1.001]
Switching
K - S U A
Resetting manual setpoints Input 1 bit
[1.001]
Switching
K - S - A
Dew point alarm Input 1 bit
[1.001]
Switching
K - S U A
Outside temperature
for summer compensation
Input 2 bytes
[9.001]
Temperature
(°C)
K - S U A
Summer compensation
active
Output 1 bit
[1.001]
Switching
K - - U -
Setpoint reached Output 1 bit
[1.001]
Switching
K - - U -
Units switchover (master) Input 1 bit
[1.001]
Switching
K - S U A
Units switchover Input 2 bytes
[9.001]
Temperature
(°C)
K - S - A
Setpoint temperature
Input/
Output
2 bytes
[9.001]
Temperature
(°C)
K - S U A
Temperature calibration Input 2 bytes
[9.001]
Temperature
(°C)
K - S - A

