Operation
Product manual 2CKA001473B5023
219
The following areas become available:
Function
Display
■
Setting the brightness of the display via the slider.
Cleaning blockage
■
To ensure that no function is triggered
unintentionally during cleaning of the device, the
control elements can be disabled for a certain time.
■
The cleaning blockage is activated with a press of
the button. It is automatically deactivated after 30
seconds.
Sound
■
Fixing the volume for the following sounds.
– Click sound
– Warning sound
– Fault sound
■
Also a selection of sounds for different types of messages ca be made.
■
If a micro SD card (SDHC) with suitable sound files is in the device,
select a different sound from the card via the drop-down menu. The
sound files should have format "mp3". Also wave files can be used.
Notice
The card must remain inserted in the device for this
function!
Time and date
■
Different time and date settings:
– Time
– Time zone
– Date
– Start of week
Screensaver
■
Different settings for the specified screen saver.
– The default setting is the display as digital clock.
– If a micro SD card (SDHC) with suitable pictures is in the device, select
a screen saver via the drop-down menu. If there are several pictures on
the micro SD card (SDHC), they are displayed as a slide show.
■
Slide show (electronic picture frame)
– With the commissioning tool you can set how long each picture is
displayed.
■
Picture requirements:
– The pictures must be stored on the micro SD card (SDHC) on the first
level in the "Picture" directory.
– The maximum permissible size of a picture is 3 MB.
■
The supported format is "*.jpg".
PIN code
■
If it was specified in the commissioning software that the end user can
change the PIN code directly on the device, this page becomes visible.
– Here the PIN code levels can be specified and adjusted.
To Next Page
Loading...
