1 Safety
1.5.2 DANGER - Moving manipulators are potentially lethal!
30 3HAC026320-001 Revision: A
1.5.2 DANGER - Moving manipulators are potentially lethal!
Description
Any moving manipulator is a potentially lethal machine.
When running the manipulator, it may perform unexpected and sometimes irrational
movements. However, all movements are performed with great force and may seriously
injure any personnel and/or damage any piece of equipment located within the manipulator
working range.
Elimination
Action Note/Illustration
1. Before attempting to run the manipulator,
make sure all emergency stop equipment is
correctly installed and connected.
Emergency stop equipment such as gates,
tread mats, light curtains, etc.
2. If possible, use the hold-to-run button
whenever possible.
The hold-to-run button is used in manual
mode, not in automatic mode.
How to use the hold-to-run control in
RobotWare 5.0 is detailed in section How
to use the hold-to-run function in the
Operating manual - IRC5 with Flex-
Pendant.
3. Make sure no personnel are present within
the manipulator working range before
pressing the start button.
To Next Page
Loading...
