ABB LGR GLA351 Series - Page 116

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
116
2. Select
Batch Injection mode in the analyzer software:
a. Click theRATE button (clock icon) in the
User Interface Control Bar . (Figure
111)
Figure 111: Click the Rate Button
3. The Operating Mode pop-up menu displays. (Figure 112)
a. Select either:
 Syringe Injection
 Syringe Injection (Dilution x10), if applicable
o The sample will be diluted x10 by filling the cavity with zero air
before measurement.
4. Click Save.
Figure 112: Rate Selection Menu