ABB PST Series - Page 166

166 1SFC132003M0201
7URXEOHVKRRWLQJ
&KDSWHU
37&SURWHFWLRQ An over-temperature is detected
by the PTC thermistors in the
motor.
• Check that the PTC circuit is closed and
that the inputs are connected.
• Check and correct the reason for the
overheating.
• Wait for the motor to cool sufficiently and
restart.
7K\ULVWRURYHUORDGSURWHFWLRQ The softstarter is too small.
Too many starts / hour.
The ramp time for start is too
long.
• Check and replace the softstarter with
one of a suitable size.
• Check and decrease number of starts /
hour.
• Check that current limit level is not set
too low.
• Check that the ramp time for start is not
too long.
6WDWXV 3RVVLEOHFDXVH 6ROXWLRQ
Power on ProtectionFault
2TQV26%
4GUGV $CEM
Power on ProtectionFault
2TQV5%41.
4GUGV $CEM