ABB Relion 670 series - Bay Configuration Engineering

Category IEC Symbol Name IEC Symbol
Definitions
ANSI Y32.2/
IEEE 315
Symbol
Definitions
Function Block
Type
Switchgear Disconnector circuit breaker
indication only, 00 = Middle position
SCSWI,
SXCBR,
VSGAPC
Disconnector circuit breaker
indication only, 01 = Open
Disconnector circuit breaker
indication only, 10 = Closed
Disconnector circuit breaker
indication only, 11 = Undefined
Texts Static text
Texts Dynamic text VSGAPC
Texts Select button, 00 = Middle position VSGAPC
Select button, 01 = Open
Select button, 10 = Closed
Select button, 11 = Undefined
Texts Indication button, 00 = Middle
position
VSGAPC
Indication button, 01 = Open
Indication button, 10 = Closed
Indication button, 11 = Undefined
Texts Dynamic text (32 inputs) SLGAPC
Texts Select button (32 positions), 1 - 32 SLGAPC
Texts Indication button (32 positions), 1 -
32
SLGAPC
7.2.3 Bay configuration engineering
GUID-0D9CFE29-F00B-450F-9802-F461112B1CF4 v10
A page with a single line diagram and measurements contains active living objects.
The object values are updated by the IED periodically (measurement) or in case of
an event. Once the symbols are placed on the HMI page they must be linked to the
corresponding function block in the application configuration, which protects or
controls the object that the symbol on the HMI page represents.
Section 7 1MRK 511 398-UEN C
Local HMI engineering
102 670 series 2.2 IEC
Engineering manual