ABB Relion 670 series - Section 2 Engineering Tool Set; Introduction

Section 2 Engineering tool set
2.1 Introduction
SEMOD58253-4 v11
The structure of a monitoring and control system for electrical substations has a
principle structure as shown in
Figure 2. It contains a number of IEDs for the
various purposes.
It can be subdivided in the four main parts:
• Bay level IEDs
• Station communication
• Station level IEDs
• Process bus level
Bay level
Station level
Station
Communication
Station bus
bay
IED 1
bay
IED 2
bay
IED n-1
bay
IED n
NCC-GW
(station-IED2)
PCM600
(tool set)
HSI
(station-IED1)
Process bus
level
IEC08000101-2-en.vsdx
Process
IED 1
Process
IED 2
Process
IED m
IEC08000101 V2 EN-US
Figure 2: Principle structure of a monitoring and control system for a
substation
All three parts require specific engineering and configuration. PCM600 is used to
do the complete engineering and configuration activities needed for bay level IEDs.
Each IED type and version has its own connectivity package module used in
PCM600.
1MRK 511 398-UEN C Section 2
Engineering tool set
670 series 2.2 IEC 23
Engineering manual