GUID-BDE605BB-5ACA-456A-9334-65B3CE3C46F5 V1 EN-US
Figure 15: PCM600: IEC 61850 signal designation concept
4.6.2 Changing the SCL version of an IED
GUID-3188FA18-D04E-4BAC-9224-10F43F30F049 v3
You can change the SCL version of an IED in PCM600 from Edition 1 of
IEC 61850 to Edition 2 or the other way around. You can also convert a .pcmi file
from Edition 1 to Edition 2 or the other way around.
It is not possible to mix Edition 1 and Edition 2 IEDs in the same
PCM600 project. Therefore, it is possible to change the SCL
version only when there is one IED in the project.
1. Enable SCL version changing in PCM600.
1MRK 511 398-UEN C Section 4
Setting up a project
670 series 2.2 IEC 47
Engineering manual
To Next Page
Loading...
