IEC05000609 V2 EN-US
Figure 13: PCM600: Create a new project window
5. Name the project and include a description (optional) and click Create.
6. PCM600 sets up a new project that will be listed under Projects on my
computer.
4.6 Building a plant structure
SEMOD58409-5 v7
The plant structure is used to identify each IED in its location within the substation
organization. It is a geographical image of the substation and the bays within the
substation. The organization structure for the IEDs may differ from the structure of
the primary equipment in the substation. In PCM600 it is possible to set up a
hierarchical structure of five levels for the IED identification.
Build up the plant structure according to the project requirements. PCM600 offers
several levels to build the hierarchical order from Center down to the IEDs in a
bay.
The following levels are available:
1. Project = project name
2. Substation = name of the substation
3. Voltage Level = voltage level in substation
4. Bay = bay within the voltage level
5. IED = IED in the bay.
Section 4 1MRK 511 398-UEN C
Setting up a project
44 670 series 2.2 IEC
Engineering manual
To Next Page
Loading...
