IEC13000062 V1 EN-US
Figure 12: Select: Use the following IP address
6. Use the ping command to verify connectivity with the IED.
7. Close all open windows and start PCM600.
The PC and IED must belong to the same subnetwork for this set-
up to work.
Setting up the PC to access the IED via a network
The same method is used as for connecting to the front port.
The PC and IED must belong to the same subnetwork for this set-
up to work.
4.5 Project managing in PCM600
SEMOD58451-5 v9
It is possible to:
• Open existing projects
• Import projects
• Create new projects
• Export projects
Section 4 1MRK 511 398-UEN C
Setting up a project
42 670 series 2.2 IEC
Engineering manual
To Next Page
Loading...
