IEC08000416 V3 EN-US
Figure 72: IEC 61850: Export IED file type selection
3. The SCL Export Options window opens (see Figure 73).
4. Select Export Private Sections, Export As SCL Template or Include Goose
Sending IEDs, and click Export. Options in the SCL Export Options window
are only available when an ICD file is exported.
IEC08000418 V2 EN-US
Figure 73: IEC 61850: Export IED file Options
8.4 Easy GOOSE engineering in the application
configuration tool
GUID-7EF7A8E8-943A-472D-85A6-F07382A0FC94 v2
Easy GOOSE engineering enables configuration of GOOSE communication
between two or more IEDs in a single tool, the application configuration tool
(ACT). GOOSE datasets and GOOSE control blocks are created automatically
when the configuration is done in ACT. Easy GOOSE engineering does not replace
GOOSE engineering in the Signal Matrix Tool (SMT) or the IEC 61850
Engineering tool.
Easy GOOSE Engineering is supported for both IEC 61850 Edition 1 and IEC
61850 Edition 2 configured IEDs.
Section 8 1MRK 511 398-UEN C
IEC 61850 communication engineering
114 670 series 2.2 IEC
Engineering manual
To Next Page
Loading...
