Section 4 Setting up a project
4.1 PCM600 projects
SEMOD58401-5 v3
A typical project in PCM600 contains a plant structure including one or several
IED objects, where each IED object contains the engineering data created or
modified using the different PCM600 tools.
Several projects can be created and managed by PCM600, but only one project can
be active at a time.
4.2 Installing Connectivity packages
GUID-0863CF81-30F7-468C-957D-61E99CD5010D v9
A Connectivity package contains the complete description of the IED data signals,
parameters and protocol addresses for a certain IED type and version. Several types
of IEDs can be managed in one PCM600 project, thus the corresponding
Connectivity package has to be installed on the PC. Connectivity Packages and
Connectivity Package Updates are managed in the Update Manager.
PCM600 must be installed before the connectivity packages can be
installed.
PCM600 version 2.8 or newer must be used with the 2.2 version of
the IED. The Connectivity package used with PCM600 2.8 and the
2.2 version of the IED must be of version 1.0.0.0.
A Connectivity package for a specific IED type and version is divided in two parts.
The IED Connectivity package base module is common for all IEDs. The IED
specific module is separate for each type of IED.
Installing the IED Connectivity package
The Connectivity package is available on the media that was distributed along with
the IED. The user manuals for all IEDs are contained in a separate installation
package Relion 670 v.2.2 series User Documentation. This package must be
installed to access manuals for a specific IED type in PCM600.
Procedure
1MRK 511 398-UEN C Section 4
Setting up a project
670 series 2.2 IEC 33
Engineering manual
To Next Page
Loading...
