ABB RET615 User Manual

CTRL.CBCSWI1 Circuit breaker operation counter (1) .........71
LD0.ARCSARCx1 Arc protection........................................... 71
LD0.CMMXU1 Phase current demand values (1).................. 71
LD0.CMMXU1 Three-phase current measurement (1) ......... 73
LD0.CMMXU2 Phase current demand values (2) ................. 73
LD0.CMMXU2 Three-phase current measurement (2) ......... 74
LD0.CSMSQI1 Sequence current measurement (1) .............74
LD0.PEMMTR1 Three-phase energy measurements............ 75
LD0.PEMMXU1 Power measurement demand values (1) .... 75
LD0.PEMMXU1 Three-phase power and energy
measurement (1).................................................................... 76
LD0.RESCMMXU1 Residual current demand value (1).........76
LD0.RESCMMXU1 Residual current measurement (1)......... 77
LD0.RESCMMXU2 Residual current demand value (2) ........77
LD0.RESCMMXU2 Residual current measurement (2) ........ 77
LD0.RESVMMXU1 Residual voltage demand value (1) ....... 78
LD0.RESVMMXU1 Residual voltage measurement (1) ........ 78
LD0.SSCBR1 Circuit-breaker condition monitoring (1).......... 78
LD0.T2PTTR1 Three-phase thermal overload protection,
two time constants (2) ........................................................... 79
LD0.TPOSYLTC1 Tap changer position indication (1)...........79
LD0.TR2PTDF1 Stabilized and instantaneous differential
protection for two-winding transformers (1)............................79
LD0.VMMXU1 Three-phase voltage measurement (1) ......... 80
LD0.VMMXU1 Voltage demand values (1)............................ 80
LD0.VSMSQI1 Sequence voltage measurement (1)..............81
LD0.XARGGIO130 RTD input values.................................... 81
LD0.XRGGIO130 RTD input values.......................................81
Unmapped registers.................................................................... 81
CTRL.LLN0 Local, Remote, Station, Off and Combinations.. 82
LD0.FMMXU1 Frequency measurement (1).......................... 82
LD0.LLN0/LPHD1/LDEV1 System values .............................82
LD0.MDSOPT1 Runtime counter for machines and
devices (1)..............................................................................82
LD0.MVI4GAPC1 Integer value move (1).............................. 82
LD0.SCA4GAPC1 Analog value scaling (1)...........................83
LD0.SCA4GAPC2 Analog value scaling (2)...........................83
LD0.SCA4GAPC3 Analog value scaling (3)...........................83
LD0.SCA4GAPC4 Analog value scaling (4)...........................84
Controls............................................................................................ 84
Reset, acknowledge and trigger points....................................... 84
CTRL.CBCSWI1 Circuit breaker control (1)................................ 85
CTRL.DCXSWI1 Disconnector control (1) ..................................85
CTRL.DCXSWI2 Disconnector control (2)...................................86
Table of contents
RET615 5
Point List Manual

ABB RET615 Specifications

General

Rated Frequency	50/60 Hz
Weight	Approx. 2.5 kg
Type	Protection Relay
Communication Protocols	IEC 61850, Modbus, DNP3
Protection Functions	Overcurrent, Earth fault, Thermal overload, Frequency
Input Voltage	24-250 V DC