127
ABOV Semiconductor Co., Ltd.
T1CRL (Timer 1ControlLow Register): BAH
Initial value: 00H
Select Timer 1 clock source. fx is main system clock frequency
When T1 Interrupt occurs, this bit becomes ‘1’. For clearing bit, write ‘0’ to this bit or
auto clear by INT_ACK signal. Writing “1” has no effect.
T1 Interrupt no generation
T1O/PWM1O Polarity Selection
Start High (T1O/PWM1O is low level at disable)
Start Low (T1O/PWM1O is high level at disable)
Timer 1 External Clock Edge Selection
External clock falling edge
External clock rising edge
Timer 1 Counter Read Control
Load the counter value to the B data register (When write, automatically
cleared “0” after being loaded)
To Next Page
Loading...
Need help?
General
