253
ABOV Semiconductor Co., Ltd.
15 Flash Memory
15.1 Overview
15.1.1 Description
MC96F6432S incorporates flash memory to which a program can be written, erased, and overwritten while mounted
on the board. The flash memory can be read by ‘MOVC’ instruction and it can be programmed in serial ISP mode or
user program mode.
• Flash Size : 32Kbytes
• Single power supply program and erase
• Command interface for fast program and erase operation
• Up to 100,000 program/erase cycles at typical voltage and temperature for flash memory
NOTE)
1. The RXE bit of USInCR2 register should be disabled before flash memory erase and write start.