32 UK
12. Menu functions
12.1 Contact Details
The device can manage up to 10 contacts. The following parameters are
assigned to these contacts:
Contact name:
Each contact name can have up to 16 characters. Used to
uniquely identify the destination so you can better remember the
destination to which you want to send.
Contact telephone number:
Each telephone number can have a maximum length of 24 digits.
During programming, the “Record” key can be used to enter the
following symbols:
* (star): Inserts a star (*) into the number.
# (pound key): Inserts a hash (#) into the number.
, (comma=dial pause): Inserts a comma (,) into the
number. The comma causes a dial pause of three
seconds. In private branch exchanges, after the
exchange access code is dialed, it is usually necessary
to pause before the actual external telephone number
can be selected. E.g.:
0, 0173 1234567
If you want to reach a telephone in another country, you
must also include the international dialing code.
Example:
The device is connected to an extension of a private
branch exchange in Germany and is supposed to reach
a telephone that has the home network vodafone in the
UK.
0 0044 7785 1234567
0 Exchange dial-up prefix (exchange access code)
0044 Dial-up prefix for reaching the international
telephone network (00) and country code prefix for the
UK (44)
7785 Network prefix for vodafone UK
1234567 actual telephone number
To Next Page
Loading...
Need help?
General
