44 UK
None:
Dialing attempts can never be canceled (default).
Passcode:
Dialing attempts can only be canceled by entering the
passcode.
Code or Restore:
Dialing attempts can be canceled
By entering the passcode
By restoration of the normal state of the
affected input
Restore Only:
Dialing attempts can be canceled only by restoring the
normal state of the affected input.
12.5.2 Ack (acknowledge):
Here you set whether the device should dial the other contact addresses
after confirmation or whether it should cancel the dialing procedure.
The device establishes a connection and transmits the message. Now the
device requires a confirmation signal from the receiver that the message has
arrived.
To confirm the call, the recipient must press the number 8 on the telephone
keypad.
If the call is not confirmed, then the device dials the next programmed
contact number.
Anyone:
If the message is confirmed, further dialing attempts will
be canceled for this alarm trigger (default).
No One:
After the confirmation message, the device will not call
this contact again. The device now calls all other contact
addresses for this alarm trigger.
To Next Page
Loading...
Need help?
General
