28 UK
11.1 Starting the programming menu
1. In standby mode, the device displays the temperature, time, and
date.
GSM/PSTN +29°C
12:07 01Jan13
2. Enter your passcode (default: 1234). The display now shows the
first menu point.
↑↓ [ENT] to Select
Contact Details
3. Use the arrow keys to scroll through the menu. Press a key from 1
to 0 to go directly to the desired menu item (for example, “9” to
access the event log).
4. Press ENT to edit the selected menu item.
5. To delete individual characters, press the ESC key.
6. To exit, press ESC. The changes are not saved.
7. Press ENT to confirm the data entered or selection made.
Example 1: Setting the contact details
1. Enter your user code. The initial contact details menu point is then
displayed.
↑↓ [ENT] to Select
Contact Details
2. Press ENT to select. Contact 01 is displayed.
3. Use the arrow keys to scroll through the contacts. Press a key
from 1 to 0 to go directly to the desired contact (for example, “4” to
go to contact 4).
4. Press ENT to edit the selected contact.
5. Use the letter keys to change the contact name.
6. Use the arrow keys to move the cursor to the right or left.
To delete individual characters, press the CLEAR key.
7. To confirm, press ENT.
To exit, press ESC. The changes are not saved. You can now
enter the number of the contact.
To Next Page
Loading...
Need help?
General
