40 UK
An output of type “Message Waiting” also switches if such a memo exists.
When deactivated (OFF), no messages are caused to be recorded by the
trigger (default).
12.3.7 Report Options
Use Auto Report
To regularly check whether your chosen transmission path is
functional and whether the destination numbers can be reached
To prevent the wireless provider from disabling your wireless
connection. This can happen if there is no activity and no calls
placed from this connection for a long time (when using pay-as-
you-go or prepaid cards).
Auto Report
When activated (ON), the device will automatically dial the programmed
telephone numbers and send the “location message”.
(See menu item Call Routing Auto Report Auto Report On)
When the function is deactivated (OFF), no auto reports are started (default).
Note: The auto reports must be confirmed by the recipient on the telephone,
or else the number will be dialed again repeatedly!
Report Time
Report Time
Here you can set the desired time at which the auto
report is to start (the default is 12:00 noon). Only full
hours are possible.
Report Day
Here you can set the desired day of the week for the
auto report to start (the default is Mo).
So, Mo, Tu, We, Th, Fr, Sa, or daily
Report Interval
Here you set the desired time interval of how many
weeks are to pass between auto reports (the default is 1
week).
Setting options: from every week up to every 12 weeks,
that is, the shortest interval is one week, and the longest
interval is 12 weeks.
To Next Page
Loading...
Need help?
General
