6146/6156 DC Voltage/Current Generators Operation Manual
5.4.3 Setting Up USB
5-13
5.4.3.2 Setting USB Interface and USB ID
These settings are enabled when the USB interface is selected.
5.4.3.3 Precautions when Using USB
When running a query command, leave a 20 ms wait time right after the previous command.
Operation Character display area
1. 6146
Press MENU and select ..7..I/F with , or .
MENU
..7.. I/F
6156
Press MENU and select ..8..I/F with , or .
MENU
..8.. I/F
2.
Enter the Select level with .
(Currently set I/F)
I/F
GPIB BUS
(If the USB interface is currently set, start from Step 6.)
3.
Enter the Input/Run level with .
BUS
GPIB
4.
Select USB with , or .
BUS
USB
5. Press ENTER to confirm the setting. (The menu reverts to the
Select level.)
(Currently set I/F)
I/F
USB BUS
6.
Select USB id with , or .
(Currently set USB ID)
I/F
001 USBid
7.
Enter the Input/Run level with .
USBid
001
8.
Select the digit to be changed with or , and set USB
id with , or .
USBid
001
9. Press ENTER to confirm the setting. (The menu reverts to the
Select level.)
(Currently set USB ID)
I/F
002 USBid
10. Press EXIT to exit the menu.
To Next Page
Loading...